Murvaul Lake water level — Texas
Murvaul Lake in Texas was last measured at 264.19 ft (datum NGVD29), as of Aug 31, 2026, 3:00 AM (UTC-05:00) (USGS Water Services). Over its recent trend window the level has been falling (−0.7 ft). This reading is provisional and subject to revision.
- % of conservation pool full
- Not reported
- Storage
- Not reported
- Recent trend
- ↓Falling
−0.7 ft over the trend window
Recent trend
Readings this station published between Jun 2, 2026 and Aug 31, 2026 — a 89-day window — downsampled for display.
Data: USGS Water Services (waterservices.usgs.gov) and USACE CWMS Data (cwms-data.usace.army.mil), retrieved 2026-08-31. Both public domain (a work of the U.S. Government, 17 U.S.C. §105).
Source: USGS site 08022200, retrieved Aug 31, 2026, 8:24 AM (UTC+00:00). Official page for this lake →
About this gauge's record
This site's drainage basin covers approximately 115 sq mi of contributing watershed.
The dam behind Murvaul Lake
Murvaul Lake is held back by Murvaul Bayou Dam , an earthfill embankment, holding the pool back by sheer mass and an impervious core rather than by the strength of concrete , standing 46 ft high and running 9,000 ft along its crest , built across MURVAUL CREEK (MURVAUL BAYOU) in Panola County , near GARY . It was completed in 1956 and modified in 1991S , and is owned by PANOLA COUNTY FWSD 1 (a private owner) , to a design credited to FORREST AND COTTON;KSA ENGINEERS.
Its recorded primary purpose is water supply — delivering water to its customers comes first, so drawdown here follows demand as much as it follows rainfall . It also serves water supply;recreation.
It is founded on soil, with a earth core. Its spillway is ungated: once the pool reaches the crest, water leaves on its own and the operator cannot hold it back. The spillway opening is 250 ft wide. Its outlet works use uncontrolled1;valve2.
NID classes it high hazard potential. That describes what a failure would cost downstream — loss of life would be expected — and says nothing about how likely a failure is, or what condition the dam is in. Its most recent condition assessment was fair: sound under normal loading, though a rare or extreme event could expose a deficiency. That assessment is dated 10/21/2022.
At its normal pool the reservoir covers about 3,720 acres. NID records a maximum storage of 129,000 acre-ft against a normal storage of 45,840 acre-ft. Its maximum discharge capacity is 49,100 cubic feet per second. It is regulated by TCEQ.
Dam facts: National Inventory of Dams record TX00330 , filed by Texas — U.S. Army Corps of Engineers, public domain. Water levels above come from USGS Water Services and are a separate source. (How this dam was matched to this gauge →)
How Murvaul Lake compares nearby
All 6 nearby lakes with a current trend are also falling, suggesting a regional pattern rather than an operation specific to this dam.
Nearby lakes
The six nearest published lakes by centroid distance (great-circle) — cross-state neighbors included.
| Lake | State | Level | Distance |
|---|---|---|---|
| Martin Lake | TX | 303.53 ft | 30 km |
| Lake Cherokee | TX | 278.43 ft | 44 km |
| Lake Striker | TX | 291.43 ft | 54 km |
| Lake Nacogdoches | TX | 276.73 ft | 63 km |
| Lake Tyler | TX | 373.84 ft | 75 km |
| Little Cypress | TX | 176.84 ft | 76 km |
Frequently asked questions
- What is the current water level of Murvaul Lake?
- As of Aug 31, 2026, 3:00 AM (UTC-05:00), the pool elevation was 264.19 ft (datum NGVD29), provisional and subject to revision. See the trend chart above for the recent direction.
- Is Murvaul Lake full right now?
- Its managing agency does not publish a %-of-conservation-pool-full figure for this lake, so we show the bare level rather than estimate one.
- Where does this data come from?
- From USGS site 08022200, retrieved Aug 31, 2026, 8:24 AM (UTC+00:00).
More in Texas
See every lake tracked in Texas, or read the methodology behind these figures.