Conconully Lake at Conconully water level — Washington

Washington · USGS · reading Aug 31, 2026, 12:45 AM (UTC-07:00) Provisional

Conconully Lake at Conconully in Washington was last measured at 2,300.91 ft (datum NGVD29), as of Aug 31, 2026, 12:45 AM (UTC-07:00) (USGS Water Services). Over its recent trend window the level has been falling (−4.7 ft). This reading is provisional and subject to revision.

Current reading Conconully Lake at Conconully · Washington
Pool elevation
2,300.91 ft

Datum NGVD29 · provisional, subject to revision. (Why datum matters →)

% of conservation pool full
Not reported
Storage
Not reported
Recent trend
↓Falling

−4.7 ft over the trend window

Recent trend

Readings this station published between Jun 30, 2026 and Aug 31, 2026 — a 61-day window — downsampled for display.

2310.9ft2300.9ftJun 30 – Aug 31

Data: USGS Water Services (waterservices.usgs.gov) and USACE CWMS Data (cwms-data.usace.army.mil), retrieved 2026-08-31. Both public domain (a work of the U.S. Government, 17 U.S.C. §105).

Not for navigation or safety decisions (why →)

Source: USGS site 12446300, retrieved Aug 31, 2026, 8:24 AM (UTC+00:00). Official page for this lake →

The dam behind Conconully Lake at Conconully

Conconully Lake at Conconully is held back by Salmon Lake Dam (also recorded as Conconully Lake) , an earthfill embankment, holding the pool back by sheer mass and an impervious core rather than by the strength of concrete , standing 54 ft high and running 1,250 ft along its crest , built across SALMON CREEK OS in Okanogan County , near CONCONULLY . It was completed in 1921 and modified in 2001E;2001F;2001S;2003S , and is owned by BUREAU OF RECLAMATION (a federal owner) , to a design credited to BUREAU OF RECLAMATION.

Its recorded primary purpose is irrigation — the pool is drawn down across the growing season to serve water rights downstream, then refilled over winter .

Its spillway is ungated: once the pool reaches the crest, water leaves on its own and the operator cannot hold it back. The spillway opening is 5 ft wide.

NID classes it high hazard potential. That describes what a failure would cost downstream — loss of life would be expected — and says nothing about how likely a failure is, or what condition the dam is in.

At its normal pool the reservoir covers about 313 acres. NID records a maximum storage of 17,280 acre-ft against a normal storage of 15,700 acre-ft. Its maximum discharge capacity is 314 cubic feet per second.

Dam facts: National Inventory of Dams record WA00291 , filed by Bureau of Reclamation — U.S. Army Corps of Engineers, public domain. Water levels above come from USGS Water Services and are a separate source. (How this dam was matched to this gauge →)

How Conconully Lake at Conconully compares nearby

5 of 6 nearby lakes with a current trend are also falling right now.

Nearby lakes

The six nearest published lakes by centroid distance (great-circle) — cross-state neighbors included.

Lakes nearest to Conconully Lake at Conconully, with current level and distance.
Lake State Level Distance
Conconcully Reservoir WA 2,255.39 ft 2 km
Osoyoos Lake WA 911.28 ft 50 km
Franklin Roosevelt Lake WA 1,284.17 ft 88 km
Lenore Lake WA 1,076.92 ft 117 km
Soap Lake WA 1,068.53 ft 130 km
Baker Lake WA 725.81 ft 143 km

Frequently asked questions

What is the current water level of Conconully Lake at Conconully?
As of Aug 31, 2026, 12:45 AM (UTC-07:00), the pool elevation was 2,300.91 ft (datum NGVD29), provisional and subject to revision. See the trend chart above for the recent direction.
Is Conconully Lake at Conconully full right now?
Its managing agency does not publish a %-of-conservation-pool-full figure for this lake, so we show the bare level rather than estimate one.
Where does this data come from?
From USGS site 12446300, retrieved Aug 31, 2026, 8:24 AM (UTC+00:00).

More in Washington

See every lake tracked in Washington, or read the methodology behind these figures.